FixVault
Home › Ford › 2011 › Explorer Base, FWD, 6F50 › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Connecting Rod Bushing Diameter › General Procedure

General Procedure

NOTE: Refer to general specifications in the appropriate 303-01 engine section for the appropriate specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Checking Connecting Rod Bushing Inner Diameter
    G07420846Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Checking Connecting Rod Bushing Outer Diameter
    G07420847Courtesy of FORD MOTOR CO.
About FixVault