Cooling System Flushing: Material
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A |
- Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING in this information.
- Remove the thermostat. For additional information, refer to THERMOSTAT in this information.
- Install the coolant hose connection without the thermostat.
- Use cooling system Pro Flush and Fill, Flush Kit and Drain Kit to flush the cooling system.
- Install the thermostat. For additional information, refer to THERMOSTAT in this information.
- Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING in this information.
WARNING:
Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions may result in serious personal injury.
NOTE:
Refer to the cooling system Pro Flush and Fill operating instructions for specific vehicle hook-up.