Component testing procedure
WARNING: This page is about a different car, the 2012 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 4 and 9 | Left turn | Closed circuit |
| Off | Open circuit | ||
| 8 and 9 | Right turn | Closed circuit | |
| Off | Open circuit | ||
| Flash-to-pass | 10 and 9 | Lever stalk in first detent toward steering wheel | Open circuit |
| 5 and 9 | Closed circuit | ||
| High beam | 10 and 9 | Lever stalk in second detent toward steering wheel | Closed circuit |
| 5 and 9 | Open circuit | ||
| Trip computer switch | 3 and 9 | Pressed | Closed circuit |
| Released | Open circuit | ||
| Voice Switch | 2 and 7 | Pressed | Closed circuit |
| Released | Open circuit |