Section 357 (Engine Cooling System): Specifications: Material
WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- | - | ||
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A | - | ||
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D | 5.5L (5.8 qt)(1) | ||
| Motorcraft® Orange Antifreeze/Coolant Prediluted VC-3DIL-B (US); CVC-3DIL-B (Canada) | WSS-M97B44-D2 | 5.5L (5.8 qt) | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Pressure Tests | |
| Complete cooling system maximum pressure | 138 kPa (20 psi) |
| Pressure relief cap | 145-159 kPa (21-23 psi) |
| Radiator (out of vehicle) | 138 kPa (20 psi) |
| Thermostat Opening Temperatures | |
| Thermostat starts to open | 82°C (180°F) |
| Thermostat fully open | 97°C (207°F) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||||
|---|---|---|---|---|---|---|---|
| A/C compressor bolts and studbolt | 24 | 18 | - | ||||
| A/C tube bracket nut | 10 | - | 89 | ||||
| Accessory drive belt idler pulley bracket bolts | 24 | 18 | - | ||||
| Block heater (1) | 3 | - | 27 | ||||
| Coolant connection bolts | 10 | - | 89 | ||||
| Coolant pump bolts (2) | - | - | - | ||||
| Coolant pump pulley bolts | 20 | - | 177 | ||||
| Engine mount bolts | 48 | 35 | - | ||||
| Engine mount nuts | 80 | 59 | - | ||||
| Engine mount studs | 8 | - | 71 | ||||
| Engine plug bolt | 20 | - | 177 | ||||
| Timing belt cover bolts | 9 | - | 80 | ||||
| Timing belt tensioner bolt | 20 | - | 177 | ||||
|
|||||||