Programming the Autolock Feature Using the Instrument Cluster (IC) Message Center

NOTE: The autolock feature can be activated or deactivated independently of the auto-unlock feature.

NOTE: The autolock feature of the SJB can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION .

With all the vehicle doors closed, turn the ignition key from the OFF to the ON position.
Press and release the SETUP button on the message center switch until AUTOLOCK ON> OFF is displayed.
Press the RESET button to select ON or OFF. If the autolocks are enabled, the message center will have brackets around the ON> display. If the autolocks are disabled, the message center will have brackets around the OFF> display.