FixVault
Home › Ford › 2011 › Focus S, Standard › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Piston Pin Bore Diameter

Piston Pin Bore Diameter

NOTE: Refer to the appropriate ENGINE MECHANICAL - 2.0L article for the specification.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
Fig 1: Piston Pin Bore Diameter Measuring Directions
G07802728Courtesy of FORD MOTOR CO.
About FixVault