Symptom Table

SYMPTOM TABLE

Condition	Possible Sources	Action
The cruise control is inoperative	PCM not configured for cruise control Wiring, terminals or connectors Clockspring Digital Transmission Range (TR) sensor (automatic transaxle) Cruise control switch Stoplamp switch Clutch pedal cruise control deactivator switch (manual transaxle) Vehicle speed signal concern PCM ABS module	GO to PINPOINT TEST A .
The cruise control does not disengage when the clutch pedal is applied	Wiring, terminals or connectors Clutch pedal cruise control deactivator switch PCM	GO to PINPOINT TEST D .
The cruise control indicator lamp is always/never on	Wiring, terminals or connectors Instrument Cluster (IC) PCM	REFER to INFORMATION CENTER - INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
The cruise control switches do not operate correctly	Wiring, terminals or connectors Cruise control switches Clockspring PCM	GO to PINPOINT TEST C .
The cruise control cannot set above 130 km/h (80 mph)	A MyKey™ is in use and MyKey™ max speed limiter is turned ON	VERIFY if a MyKey™ is in use. REFER to ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) . With an admin key, VERIFY if MyKey™ max speed limiter is on. REFER to the Owner's manual if necessary VERIFY cruise control normal operation with an admin key.