Transmission Range (TR) Sensor: Removal

1. Remove the 7 screws and the underbody cover.
   Fig 1: Locating Underbody Cover Mounting Screws

   Courtesy of FORD MOTOR CO.
2. Disconnect the selector lever cable end from the manual control lever.
   Fig 2: Locating Selector Lever Cable

   Courtesy of FORD MOTOR CO.
3. Disconnect the Transmission Range (TR) sensor electrical connector.
   Fig 3: Locating Transmission Range (TR) Sensor Electrical Connector

   Courtesy of FORD MOTOR CO.
4. Remove the nut and the manual lever.
   Fig 4: Locating Manual Lever Mounting Nut

   Courtesy of FORD MOTOR CO.
5. Remove the 2 bolts, slide the TR sensor off of the manual shaft and remove the TR sensor.

Fig 5: Locating TR Sensor Mounting Bolts

Courtesy of FORD MOTOR CO.