FixVault
Home › Ford › 2011 › Mustang Base, 2D Convertible, Automatic › Repair and Diagnosis › Accessories & Equipment › Communication Devices › MULTIFUNCTION Electronic Module › Removal And Installation › Body Control Module B (BCM-B) › Installation

Body Control Module B (BCM-B): Installation

  1. Position the BCM-B  on the BCM-B  bracket and install the 2 nuts.
  2. Connect the 2 BCM-B  electrical connectors.
  3. Position the BCM-B  bracket assembly in place and install the 4 nuts, tightening the rear nuts first.
  4. Position the RH luggage compartment trim cover and install the pushpin.
    5. NOTE: If the BCM-B  is being replaced, follow this step. If the BCM-B  is not being replaced, the procedure is complete.
  5. Download the module configuration information from the scan tool into the BCM-B  . For additional information, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article.
  6. Carry out the BCM-B  self-test (must include an on-demand self-test) and then repeat the self-test to confirm all BCM-B  DTCs have been cleared.
About FixVault