FixVault
Home › Ford › 2011 › Mustang Base, 2D Convertible, Automatic › Repair and Diagnosis › Accessories & Equipment › Communication Devices › MULTIFUNCTION Electronic Module › Removal And Installation › Body Control Module B (BCM-B) › Removal

Body Control Module B (BCM-B): Removal

NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be downloaded into the new Body Control Module B (BCM-B) after installation. For additional information, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article.
    NOTE: If the BCM-B  is being replaced, follow this step. If the BCM-B  is not being replaced, go to Step 2.
  1. Upload the module configuration information from the BCM-B into the scan tool. For additional information, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article.
  2. From the right side of the luggage compartment, remove the pushpin and position the RH luggage compartment trim cover.
  3. Remove the 4 BCM-B  bracket assembly nuts and position the assembly for access to the BCM-B  .
  4. Disconnect the 2 BCM-B  electrical connectors.
  5. Remove the 2 nuts and the BCM-B  .
About FixVault