Component testing procedure
WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test |
Connect self-powered test light or ohmmeter to terminals |
Move switch to these positions |
A good switch will indicate |
| Window adjust switches |
3 and 1
4 and 5 |
Up |
Closed circuit |
3 and 5
1 and 2 |
Down |
Closed circuit |
4 and 5
2 and 1 |
Off |
Closed circuit |