Electronic Automatic Temperature Control (EATC): Notes
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The dual-zone Electronic Automatic Temperature Control (EATC) module analyzes input from the following major sources:
- Temperature, airflow mode, blower, A/C and RECIRC selection (made by the vehicle occupants)
- In-vehicle temperature sensor
- Ambient temperature sensor
- Solar radiation sensor
- Evaporator temperature sensor
- Vehicle speed
- Engine coolant temperature
Using these inputs, the dual-zone HVAC module determines the correct conditions for the following outputs:
- A/C compressor operation
- Blower speed
- Temperature blend door position
- Airflow mode door position
- Air inlet door position