FixVault
Home › Ford › 2012 › Econoline Base, Van Cargo › Repair and Diagnosis › External Pages › Different variant/trim › Section 56 (Handles, Locks, Latches And Entry Systems) › General Procedures › Stepped Unlock Programming

Stepped Unlock Programming

WARNING: This page is about a different variant/trim than selected.
  1. With the ignition switch in the OFF position, press the LOCK and UNLOCK buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds.
    • The turn signals flash twice to indicate the mode change.
  2. Repeat Step  1 to enable/disable the stepped unlocking feature.
About FixVault