Component testing procedure
WARNING: This page is about a different variant/trim than selected.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamps | 3 and 7 | Off | Open circuit |
| Park | Open circuit | ||
| Head | Closed circuit | ||
| Park lamps | 2 and 3 | Off | Open circuit |
| Park | Closed circuit | ||
| Head | Open circuit | ||
| Off | 3 and 6 | Off | Closed circuit |
| Park | Open circuit | ||
| Head | Open circuit |