Transaxle Case Bushing: Installation

Clean the halfshaft bushing area of the transaxle case.
Assemble the Handle and the Bushing Installer and Install a new bushing on the Bushing Installer.

Fig 1: Identifying Bushing On Bushing Installer
Courtesy of FORD MOTOR CO.
Using the Handle and the Bushing Installer, install a new bushing in the transaxle case.

Fig 2: Installing Bushing In Transaxle Case Using Handle And Bushing Installer
Courtesy of FORD MOTOR CO.
Install a new halfshaft seal. For additional information, refer to HALFSHAFT SEAL - LH .
Install the drain plug.
- Tighten to 12 Nm (106 lb-in).
  
  Fig 3: Locating Drain Plug
  Courtesy of FORD MOTOR CO.