FixVault
Home › Ford › 2012 › Edge SE, 2.0 9 › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle/Transmission - 6F35 › In-Vehicle Repair › Transmission Control Module (TCM) › Removal

Transmission Control Module (TCM): Removal

    NOTE: Keep the Transmission Control Module (TCM) electrical connector straight when disconnecting it or damage to the connector terminals can occur.
    Fig 1: Locating Transmission Control Module Electrical Connector
    G07932083Courtesy of FORD MOTOR CO.
  1. Slide the lock tab up and disconnect the Transmission Control Module (TCM) electrical connector.
  2. Remove the 2 TCM nuts and remove the TCM.
    Fig 2: Locating TCM Nuts
    G07932084Courtesy of FORD MOTOR CO.
About FixVault