FixVault
Home › Ford › 2012 › Escape XLS, AWD › Repair and Diagnosis › Transmission › Transfer Case › Power Transfer Unit › In-Vehicle Repair › Output Shaft Seal › Installation

Output Shaft Seal: Installation

  1. Using the PTO Drive Gear Outer Oil Seal Installer, install the PTU output shaft oil seal.
    Fig 1: Installing PTU Output Shaft Oil Seal
    G06098384Courtesy of FORD MOTOR CO.
  2. Install the deflector.
  3. Install the PTU output shaft flange. For additional information, refer to OUTPUT FLANGE .
About FixVault