FixVault
Home › Ford › 2012 › Escape XLS, FWD › Repair and Diagnosis › Transmission › Manual Trans › Manual Transaxle External Controls › Removal And Installation › Gearshift Lever › Removal

Gearshift Lever: Removal

  1. Remove the gearshift lever knob and boot assembly.
  2. Remove the floor console finish panel.
  3. Remove the 2 gearshift cable clips.
    Fig 1: Locating Gearshift Cable Clips
    G06098344Courtesy of FORD MOTOR CO.
  4. Carefully disconnect the gearshift cables from the gearshift lever.
  5. Remove the 4 gearshift lever nuts.
  6. Remove the gearshift lever.
About FixVault