FixVault
Home › Ford › 2012 › Explorer Base, 2.0 9 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems - With Intelligent Access › General Procedures › Remote Function Actuator (RFA) Module Keyless Entry Keypad Code Reset › General Procedure

General Procedure

NOTE: This procedure is for transferring the factory keyless entry keycode from the BCM and programming it into the RFA module.
  1. Carry out the keyless entry keypad code reset on the scan tool following the on-screen instructions.
    1. The keyless entry keypad code reset procedure is found on the scan tool under Toolbox > Body > Security.
About FixVault