Pinpoint Test

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING for lifting points.
2. Inspect the front and back of the front bumper cover for damage.

Is the front bumper cover damaged? 

1. Yes: REPAIR or INSTALL a new front bumper cover as necessary. If installing a new front bumper cover, REFER to BUMPER COVER - FRONT .
2. No: GO to 2  .

1. Inspect for debris, moisture, snow or ice on the front and back of the front bumper cover and sensor.

Is the C-CM obstructed or blocked? 

1. Yes: CLEAN the front bumper cover and radar sensor portion as necessary.
2. No: GO to 3  .

1. Inspect the C-CM  for loose mounting or damage at the 3 mounting points.

Is the C-CM bracket loose or damaged? 

1. Yes: Correctly INSTALL the bracket or INSTALL new grommets as necessary. ALIGN the sensor. REFER to Cruise Control Module (C-CM) (with Sensor) Adjustment .
2. No: GO to 4  .

1. NOTE: Remove the front bumper cover to carry out the vertical alignment procedure.

   Carry out the alignment procedures for the C-CM  . REFER to Cruise Control Module (C-CM) (with Sensor) Adjustment 

Is the concern still present? 

1. Yes: INSTALL a new C-CM  . REFER to Cruise Control Module (C-CM) .
2. No: The system is operating correctly. The condition was caused by misalignment.