FixVault

Front Disc Brake Shield: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: 352 mm (14 in) brakes shown in illustration, 325 mm (13 in) brakes similar.
  1. Remove the brake disc. For additional information, refer to BRAKE DISC  .
    • To install, tighten to 15 Nm (133 lb-in).
      G08624595