FixVault
Home › Ford › 2012 › Explorer Base, 2.0 9 › Repair and Diagnosis › External Pages › Different car › Section 263 (Anti-Lock Brake System (Abs) And Stability Control) › Removal And Installation › Anti-Lock Brake System (ABS) Module › Installation

Anti-Lock Brake System (ABS) Module: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Visually inspect the ABS  module terminals for damage before installation.

    Install the ABS  module and the 4 ABS  module screws.

    • Tighten to 2 Nm (18 lb-in).
  2. Install the HCU  . Refer to HYDRAULIC CONTROL UNIT (HCU) .
About FixVault