Anti-Lock Brake System (ABS) Module: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the HCU . Refer to HYDRAULIC CONTROL UNIT (HCU) .
-
NOTE: Make sure the HCU and ABS module are clean and free of any brake fluid or foreign material before separating the components. Do not allow any brake fluid or foreign material to enter the mating side of the ABS module or damage to the solenoids can occur.
Remove the 4 ABS module screws and the ABS module.