Network Message Chart
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NETWORK MESSAGE CHART - ACM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Audio mute | C-CM | Data used to command audio mute during possible collision event so that the warning chime can be heard. |
NETWORK MESSAGE CHART - C-CM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| HUD data | HUD module | Used for HUD active, available and fault status. |
NETWORK MESSAGE CHART - HUD MODULE
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Forward collision warning HUD flash command | C-CM | Flashes the HUD LED array when commanded. |
| Ignition satus | BCM | Used for ignition switch position input. |
NETWORK MESSAGE CHART - ABS MODULE
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Adaptive cruise control_brake deceleration request | C-CM | Request for braking when a slower vehicle ahead is detected by the C-CM . |
NETWORK MESSAGE CHART - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Forward collision warning request | C-CM | Data used to command chime during a possible collision event. |
| Adaptive cruise control warning display | C-CM | Data used to command chime and messages during a possible collision event. |