Pinpoint Tests V: Camshaft Position (CMP) Sensor: Introduction

NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

harness circuits: VREF, CMP and SIGRTN
CMP sensor (12K073)
powertrain control module (PCM) (12A650)

Fig 1: Identifying Camshaft Position (CMP) Sensor Connector
Courtesy of FORD MOTOR CO.

Fig 2: Identifying Powertrain Control Module-E (PCM-E) Connector
Courtesy of FORD MOTOR CO.