Cooling System Flushing
SPECIAL TOOLS
| Drain Kit 164-R3662 |
|
| Flush Kit 164-R3658 or equivalent |
|
| Pro Flush and Fill 023-00154 or equivalent |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A |
- Drain the cooling system. For additional information, REFER to Cooling System Draining, Filling and Bleeding .
- Remove the thermostat. For additional information, REFER to Thermostat .
- Install the coolant hose connection without the thermostat.
- Tighten the bolts to 10 Nm (89 lb-in).
- Use cooling system Pro Flush and Fill, Flush Kit and Drain Kit to flush the cooling system.
- Use Motorcraft® Premium Cooling System Flush. Follow the directions on the packaging.
- Install the thermostat. For additional information, REFER to Thermostat .
- Fill the cooling system. For additional information, REFER to Cooling System Draining, Filling and Bleeding .
WARNING:
Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions may result in serious personal injury.
NOTE:
Refer to the cooling system Pro Flush and Fill operating instructions for specific vehicle hook-up.