Component testing procedure

COMPONENT TESTING PROCEDURE CHART

Circuit to test	Connect self-powered test light or ohmmeter to terminals	Move switch to these positions	A good switch will indicate
Tilt	1 and 3	Tilt Up	Closed circuit
	1 and 2	Down	Open circuit
	1 and 4	Open	Open circuit
	1 and 5	Close	Open circuit
Down	1 and 3	Tilt Up	Open circuit
	1 and 2	Down	Closed circuit
	1 and 4	Open	Open circuit
	1 and 5	Close	Open circuit
Open	1 and 3	Tilt Up	Open circuit
	1 and 2	Down	Open circuit
	1 and 4	Open	Closed circuit
	1 and 5	Close	Open circuit
Close	1 and 3	tilt Up	Open circuit
	1 and 2	Down	Open circuit
	1 and 4	Open	Open circuit
	1 and 5	Close	Closed circuit