FixVault
Home › Ford › 2012 › Mustang Base, 2D Convertible, Automatic Trans › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Valve Stem Diameter

Valve Stem Diameter

NOTE: Refer to the appropriate Engine for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown in illustration. Verify the diameter is within specification.
    Fig 1: Measuring Diameter Of Each Intake And Exhaust Valve Stem
    G06064097Courtesy of FORD MOTOR CO.
About FixVault