Side And Rear Vision
- Description And Operation
- Diagnosis And Testing
- Blind Spot Monitoring
- Notes
- Principles of Operation
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Blind Spot Information System (BLIS®) Is Inoperative/Does Not Operate Correctly Or Poor Performance And No Message Center Warning Message Or Warning Led Indicators Present
- Pinpoint Test B: The Cross Traffic Alert (CTA) System Is Inoperative/Does Not Operate Correctly Or Poor Performance And No Warning Led Indicators Present
- Pinpoint Test C: The Left Or Right Exterior Mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED Is Constantly On And A Message In The Instrument Panel Cluster (IPC) Message Center Is Present, But No DTCs Are Recorded
- Pinpoint Test D: DTC B11D6:11 Or DTC B11D6:15 (LED MAY ALWAYS BE ON)
- Pinpoint Test E: The Side Obstacle Detection Control Module - Right (SOD-R) Does Not Respond To The Scan Tool Or Cannot Be Configured
- Pinpoint Test F: The Instrument Panel Cluster (IPC) Message Center Displays A Blocked Sensor Message
- Pinpoint Test G: The Blind Spot Information System (BLIS®) and Cross Traffic Alert (CTA) System Cannot Be Turned Off In The Instrument Panel Cluster (IPC) Message Center
- Pinpoint Test H: DTC U3000:44, 45, 46, 48, 49 Or 4A
- Pinpoint Test I: The Left Or Right Exterior Mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED Appears Dim Or Does Not Illuminate With No DTC Or Message In The Instrument Panel Cluster (IPC) Message Center Present
- Pinpoint Test J: DTC U0155:00
- Blind Spot Monitoring
- Removal And Installation