FixVault
Home › Ford › 2012 › Taurus Limited, AWD › Repair and Diagnosis › External Pages › Different car › Section 1687 (Engine Controls - Electronic Engine Controls) › Removal And Installation › Mass Air Flow (MAF) Sensor › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
  2. Remove the 2 screws and the MAF  sensor.
    • To install, tighten to 2 Nm (18 lb-in).
  3. To install, reverse the removal procedure.
About FixVault