Section 1970 (Driveline System - General Information): Specifications

WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item

Specification

Fill Capacity

Additive Friction Modifier
XL-3 (US); CXL-3 (Canada)

EST-M2C118-A

4 oz (Traction-Lok® only).

Motorcraft® High Contrast Hypoid Gear Marking Compound
XG-14

Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL (US); CXY-75W140-1L (Canada)

WSL-M2C192-A and GL-5

8.8-in rear axle ⁽¹⁾

Premium Long-Life Grease
XG-1-C or XG-1-K (US); CXG-1-C (Canada)

ESA-M1C75-B

Threadlock 262
TA-26

WSK-M2G351-A6

⁽¹⁾	Service refill capacities are determined by filling the axle to the bottom of the filler hole. The vehicle must be on a level surface.

GENERAL SPECIFICATIONS

Item	Specification
Maximum driveshaft runout	0.89 mm (0.035 in)
Maximum pinion flange runout	0.25 mm (0.009 in)
Maximum transmission flange runout	0.20 mm (0.008 in)
Minimum rotational torque (Traction-Lok®)	27 Nm (20 lb-ft)