FixVault
Home › Ford › 2012 › Taurus SE › Repair and Diagnosis › External Pages › Different car › Section 2000 (Front Disc Brake System) › Removal And Installation › Front Brake Caliper - 2 Piston › Installation

Front Brake Caliper - 2 Piston: Installation

WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper and install 2 new guide pin bolts.
    • Tighten to 34 Nm (25 lb-ft).
  2. Using 2 new copper washers, position the brake flexible hose on the brake caliper and install the brake caliper flow bolt.
    • Tighten to 55 Nm (41 lb-ft).
  3. Bleed the brake caliper. For additional information, refer to BRAKE SYSTEM - GENERAL INFORMATION for Component Bleeding.
  4. Install the wheel and tire. For additional information, refer to WHEELS & TIRES .
About FixVault