FixVault
Home › Ford › 2012 › Taurus SE › Repair and Diagnosis › External Pages › Different car › Section 2000 (Front Disc Brake System) › Removal And Installation › Front Disc Brake Shield › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to BRAKE DISC .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 20 Nm (177 lb-in).
  3. To install, reverse the removal procedure.
About FixVault