FixVault
Home › Ford › 2012 › Taurus SE › Repair and Diagnosis › External Pages › Different car › Section 2108 (Information System And Entertainment System - F150) › Removal And Installation › Telematics Module › Installation

Telematics Module: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the telematics module and install the 2 screws.
    • Connect the electrical connector.
  2. Install the instrument panel upper bin.
    1. Position the instrument panel upper bin.
    2. Install the 2 screws.
    3. Install the rubber mat.
  3. Initialize the telematics module.
    1. Wait 5 minutes after the modem-antenna is installed.
    2. Turn the ignition to RUN.
    3. Wait 10 seconds.
    4. Start the vehicle and run the engine for 30 seconds.
    5. Turn the ignition to OFF.
About FixVault