Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Remove the LH center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the RH center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the 4 screws and the Front Controls Interface Module (FCIM).
- Disconnect the electrical connectors.
- To install, tighten to 3 Nm (27 lb-in).
  
  Fig 1: Locating Front Control Interface Module Mounting Screws
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.