Section 2302 (Engine Cooling System (Gas)): Specifications
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- | - |
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D | 6.2L 24L (25.4 qt) 6.8L 26L (27.5 qt) |
| Motorcraft® Orange Antifreeze/Coolant Prediluted VC-3DIL-B (US); CVC-3DIL-B (Canada) |
WSS-M97B44-D2 | 6.2L 24L (25.4 qt) 6.8L 26L (27.5 qt) |
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- | - |
| Threadlock 262 TA-26 |
WSK-M2G351-A6 | - |
| Thread Sealant with PTFE TA-24 |
WSK-M2G350-A2 | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Pressure Tests | |
| Complete cooling system maximum pressure | Use individual reading listed on the pressure relief cap |
| Pressure relief cap | Use individual readings listed on the pressure relief cap |
| Radiator (out of vehicle) | 138 kPa (20 psi) |
| Fan Clutch Test Specifications - 6.8L Engines Only | |
| Minimum speed requirement | 1, 500 RPM |
| Maximum speed requirement | 2, 400 RPM |
| Thermostat Opening Temperatures | |
| Starts to open - 6.2L | 88°-92°C (190.4°-197.6°F) |
| Fully open - 6.2L | 104°C (219°F) |
| Starts to open - 6.8L | 86.7°-90.6°C (188-195°F) |
| Fully open - 6.8L | 100°C (212°F) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| A/C condenser bolts | 8 | - | 71 | ||
| A/C fitting-to-condenser nuts | 15 | - | 133 | ||
| Block heater retaining screw | 4 | - | 35 | ||
| Coolant crossover manifold assembly bolts - 6.8L engines | 10 | - | 89 | ||
| Coolant pump bolts - 6.2L engines(1) | - | - | - | ||
| Coolant pump bolts - 6.8L engines | 25 | 18 | - | ||
| Coolant pump pulley bolts | 25 | 18 | - | ||
| Cooling fan blade-to-fan clutch bolts | 7 Nm | - | 62 lb-in | ||
| Cooling fan clutch hub-to-coolant pump | 133 Nm | 98 lb-ft | - | ||
| Cooling fan shroud bolts | 7 Nm | - | 62 lb-in | ||
| Cooling fan clutch wiring harness bracket bolt - 6.2L engines | 7 | - | 62 | ||
| Degas bottle bolts | 19 | - | 168 | ||
| Grille support bracket bolts | 40 | 30 | - | ||
| Power steering fluid cooler bolts | 11 | - | 97 | ||
| Power steering fluid reservoir bolt | 7 | - | 62 | ||
| Radiator bracket bolts | 35 | 26 | - | ||
| Radiator support bolts | 40 | 30 | - | ||
| Thermostat bolts | 10 | - | 89 | ||
| Transmission auxiliary fluid cooler bolts | 11 | - | 97 | ||
| Vacuum reservoir bolt | 7 | - | 62 | ||
|
|||||