Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. Refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .

NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. Refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
Remove the Front Controls Interface Module (FCIM). Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
Remove the 4 screws and the ACM .
- Disconnect the electrical connectors.
- To install, tighten to 2.5 Nm (23 lb-in).
To install, reverse the removal procedure.
- Download the configuration information to the ACM . Refer to PMI in MODULE CONFIGURATION .