FixVault
Home › Ford › 2012 › Taurus SE › Repair and Diagnosis › External Pages › Different car › Section 892 (Automatic Transmission) › In-Vehicle Servicing › Intermediate Shaft Speed Sensor › Removal

Intermediate Shaft Speed Sensor: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Disconnect the intermediate shaft speed sensor electrical connector.
  3. Remove the intermediate shaft speed sensor screw.
  4. Remove the intermediate shaft speed sensor from the transmission.
About FixVault