Oil Cooler: Installation
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Using new gaskets, install the oil cooler and the 6 bolts.
- Tighten to 10 Nm (89 lb-in).
- Connect the 2 coolant hoses to the oil cooler.
- Install the LH catalytic converter. For additional information, refer to EXHAUST SYSTEM .
- Fill and bleed the cooling system. For additional information, refer to ENGINE COOLING .