Component Testing Procedure
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
POWER SEAT SWITCH, 8-WAY AND 10-WAY POWER SEAT - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Horizontal circuit | 5 and 4 | Forward | Closed circuit |
| 9 and 3 | Closed circuit | ||
| 5 and 9 | Rearward | Closed circuit | |
| 4 and 3 | Closed circuit | ||
| Front Height circuit | 5 and 2 | Up | Closed circuit |
| 6 and 3 | Closed circuit | ||
| 5 and 6 | Down | Closed circuit | |
| 2 and 3 | Closed circuit | ||
| Rear Height circuit | 5 and 1 | Up | Closed circuit |
| 12 and 3 | Closed circuit | ||
| 5 and 1 | Down | Closed circuit | |
| 1 and 3 | Closed circuit | ||
| Backrest circuit | 5 and 8 | Rearward | Closed circuit |
| 11 and 3 | Closed circuit | ||
| 5 and 11 | Forward | Closed circuit | |
| 8 and 3 | Closed circuit | ||
| Lumbar circuit | 5 and 7 | Out | Closed circuit |
| 10 and 3 | Closed circuit | ||
| 5 and 10 | In | Closed circuit | |
| 7 and 3 | Closed circuit |