FixVault
Home › Ford › 2012 › Transit Connect Base, Van Cargo › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (4F27E) › Disassembly And Assembly Of Subassemblies › Forward Clutch › Disassembly

Forward Clutch: Disassembly

  1. Remove the forward clutch pressure, friction and steel plates.
    1. Remove the retaining ring.
    2. Remove the plates.
      Fig 1: Identifying Retaining Ring And Plates
      G06292998Courtesy of FORD MOTOR CO.
  2. Using the Spring Washer Compressor, install the forward clutch assembly in a suitable press.
    Fig 2: Installing Forward Clutch Assembly
    G06292999Courtesy of FORD MOTOR CO.
  3. Using the Spring Washer Compressor, remove the forward clutch balance piston snap ring.
    Fig 3: Removing Forward Clutch Balance Piston Snap Ring
    G06293000Courtesy of FORD MOTOR CO.
    4. NOTE: If damage to the forward clutch balance piston seals is found, install a new balance piston.
    Fig 4: Locating Forward Clutch Balance Piston
    G06293001Courtesy of FORD MOTOR CO.
  4. Remove and inspect the forward clutch balance piston.
  5. Remove the forward piston return spring.
    Fig 5: Locating Forward Piston Return Spring
    G06293002Courtesy of FORD MOTOR CO.
    6. NOTE: If damage is found to the forward clutch piston seals, install a new forward clutch piston.
    Fig 6: Locating Forward Clutch Piston Assembly
    G06293003Courtesy of FORD MOTOR CO.
  6. Remove the forward clutch piston assembly.
About FixVault