Selector Lever Knob: Installation

Position the selector lever knob onto the selector lever and route the wiring harness through the selector lever bezel.

Fig 1: Locating Selector Lever And Wiring Harness
Courtesy of FORD MOTOR CO.
Slide the selector lever knob down the selector lever and install a new screw.

Fig 2: Sliding Selector Lever Knob Down Selector Lever
Courtesy of FORD MOTOR CO.

NOTE: Selector lever assembly removed for clarity.

Fig 3: Locating O/D Switch Electrical Connector

Courtesy of FORD MOTOR CO.

Connect the O/D switch electrical connector.
Install the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .