FixVault
Home › Ford › 2012 › Transit Connect Base, Van Cargo › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission External Controls › Removal And Installation › Selector Lever Knob › Removal

Selector Lever Knob: Removal

  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
    2. NOTE: Selector lever assembly removed for clarity.
    Fig 1: Locating Overdrive (O/D) Switch Electrical Connector
    G06293339Courtesy of FORD MOTOR CO.
  2. Disconnect the Overdrive (O/D) switch electrical connector.
  3. Remove the selector lever knob.
    • Remove and discard the screw.
    • Pull off the knob.
      Fig 2: Locating Selector Lever Knob And Screw
      G06293340Courtesy of FORD MOTOR CO.
About FixVault