FixVault
Home › Ford › 2013 › Escape S › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control System (EMTC) › Removal And Installation › Receiver Drier › Installation

Receiver Drier: Installation

  1. To install, reverse the removal procedure.
    • Install new O-ring seals and gasket seals.
    • Add the correct amount of clean PAG oil to the refrigerant system. Refer to REFRIGERANT OIL ADDING .
  2. Evacuate, leak test and charge the refrigerant system. Refer to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
About FixVault