FixVault
Home › Ford › 2013 › Escape S › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle External Control - 6F35 › Removal And Installation › Selector Lever › Removal And Installation

Removal And Installation

  1. Remove the floor console. Refer to INSTRUMENT PANEL AND CONSOLE .
  2. To install, tighten to 9 Nm (80 lb-in).
    G08615152
  3. To install, reverse the removal procedure.
  4. Adjust the selector lever cable when a new selector lever is installed. Refer to SELECTOR LEVER CABLE ADJUSTMENT .
About FixVault