FixVault
Home › Ford › 2013 › Escape Titanium, AWD › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems (With One-Touch Up) › General Procedures › Keyless Entry Keypad Code Programming › Erasing a Personal Entry Code

Erasing a Personal Entry Code

  1. Enter the factory set 5-digit keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode. The doors lock and then unlock to confirm programming mode is entered.
  3. Press and hold the 1/2 button for at least 2 seconds.
  4. All personal codes are now erased and only the factory set 5-digit code works.
About FixVault