FixVault
Home › Ford › 2013 › Escape Titanium, AWD › Repair and Diagnosis › External Pages › Different car › Section 388 (Engine Controls - Acceleration Control System) › Removal And Installation › Accelerator Pedal › Installation

Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the accelerator pedal and sensor assembly and the 3 bolts.
    1. Tighten to 7 Nm (62 lb-in).
  2. Connect the accelerator pedal sensor electrical connector.
About FixVault