FixVault
Home › Ford › 2013 › Escape Titanium, AWD › Repair and Diagnosis › External Pages › Different car › Section 449 (Engine Control System) › CVVT Oil Control Valve (OCV) › Repair procedures › Removal › Notes

Repair procedures: Removal: Notes

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B), and then remove the valve from the engine.
About FixVault