FixVault
Home › Ford › 2013 › Escape Titanium, AWD › Repair and Diagnosis › External Pages › Different car › Section 691 (Supplemental Restraint System) › Removal And Installation › Front Impact Severity Sensor › Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2015 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: Make sure the radiator support and front impact severity sensor mating surfaces are clean and free of foreign material before installation.

    To install, reverse the removal procedure.

  1. 2.

    If the SRS was depowered, repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .
About FixVault