FixVault
Home › Ford › 2013 › Escape Titanium, FWD › Repair and Diagnosis › External Pages › Different car › Section 420 (Automatic Transmission External Controls - Select Switch) › Removal And Installation › Selector Lever › Installation

Selector Lever: Installation

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new selector lever cable retaining clip on the selector lever cable before installing the selector lever cable.
  2. To install, reverse the removal procedure.
  3. Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE ADJUSTMENT - 6F50/6F55 .
About FixVault